![img](MIL-C-860500001im.jpg)
MIL-C-8605B
31 October 1990
Superseding
MIL-C-8605A
31 October 1980
MILITARY
SPECIFICATION
CAP; PRESSURE FUEL SERVICING
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for procurement of caps for
pressure. fuel servicing adapters.
1.2
Classification. Pressure fuel servicing caps shall be one of the following
MS29525 Cap - Pressure Fuel Servicing, 2 1/2 Inch Flush Type
MS29526 Cap - Pressure Fuel Servicing, 2 1/2 Inch Non-Flush Type
2.
APPLICABLE
DOCUMENTS
2.1 Government documents
2.1.1 Specifications and standards. The following specification and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues
of these documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation.
SPECIFICATIONS
Federal
Enamel, Alkyd, Gloss (For Exterior and Interior Surfaces)
TT-E-489
TT-S-735
Standard Test Fluids, Hydrocarbon
Military
MIL-C-5541
Chemical Conversion Coatings On Aluminum and Aluminum Alloy
Turbine Fuel, Aviation Grades JP-4 and JP-5
MIL-T-5624
MIL-C-7024
Calibrating Fluid, Aircraft Fuel System Components
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use
in improving this document should be addressed to: Naval Air Systems Command, AIR-5363, Washington,
DC 20361-5360, by using the Standardization Document Improvement Proposal (DD Form 1426)
appearing at the end of this document or by letter.
AMSC N/A
FSC 1560
DISTRIBUTION STATEMENT source to verify that this is Approved for public release; distribution is unlimited.
A,
Check the
the current version before use.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business