MIL-DTL-6396F
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) INTERNATIONAL
SAE-AMS2175
- Casting, Classification and Inspection of
SAE-AS8879
- Screw Threads, UNJ Profile, Inch
Controlled Radius Root With Increased
Minor Diameter
(Copies of these documents are available from SAE International, 400 Commonwealth
Drive, Warrendale, PA 15096-0001 or https://www.sae.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Tank performance. The tank(s) shall be capable of performing, without failure, during
all phases and environments of aircraft use as specified by the procuring activity.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.3 Tank components.
3.3.1 Type I and III tanks. These tanks shall consist of a fluid reservoir, typically referred to
in this specification as a cell or bladder, complete with all fittings and attachments.
3.3.2 Type II tanks. A tank shall consist of a cell or a group of interconnected cells to form a
complete tank or reservoir, complete with all fittings and attachments.
3.4 Materials. The materials used in the manufacture of non-self-sealing tanks shall be for
the purpose intended. The use of magnesium is prohibited.
3.4.1 Metals. Metals shall be of the corrosion-resistant type or treated to resist corrosion due
to fuels, salt fog, or atmospheric conditions likely to be met in storage or normal service.
3.4.1.1 Dissimilar metals. Unless protected against electrolytic corrosion, dissimilar metals
shall not be used in intimate contact with each other.
3.4.2 Metallic castings. Castings shall be in accordance with ASME-Y14.8.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business