MIL-DTL-6396F
3.13.2 Identification of product. Each cell assembly shall be marked for identification and
shall include:
a. Re-order by part number (insert current aircraft contractor part number).
b. Federal stock number.
c. Aircraft model(s) and cell location.
d. Cure date (month and year).
e. Construction number.
f. Cell manufacturer and CAGE code.
g. Cell manufacturer part number.
h. Weight, empty (actual).
i. MIL-DTL-6396F, Type, Class (if applicable).
j. Contract or order number.
3.13.2.1 Identification. Identification (e.g., nameplate, stencil, etc.) shall be located on the
cell in such a position that when the cell is installed in the aircraft, identification is visible with
the minimum possible disruption of the cell installation. Identification shall be durably and
legibly marked onto the tank.
3.13.3 Access door covers. Unless otherwise specified, the exterior surface of all access
door covers shall be durably and legibly marked "OUTSIDE".
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified
as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. Inspection shall consist of phase I and phase II tests.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business